Reinforced concrete joints×合同製鐡株式会社 - List of Manufacturers, Suppliers, Companies and Products

Reinforced concrete joints Product List

1～4 item / All 4 items

Displayed results
Construction method: Mechanical rebar joint [EG joint (splicing type)]

Construction method: Mechanical rebar joint [EG joint (splicing type)]

Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.

The 【EG Joint】 is a mechanical rebar joint that connects rebar ends joined by friction welding with couplers and tightens with lock nuts. It does not require special techniques, allowing for a reduction in construction time. Because it is groutless, temperature management is unnecessary, and no industrial waste is produced. 〇 Obtained the performance evaluation standard for rebar joints【Class A】 in the 2007 edition of the Technical Standards for Structural Design of Buildings (Evaluation Number: BCJ Evaluation-RC 0001-04 by the Japan Architectural Center) 〇 Confirmed the joint performance of the Japan Society of Civil Engineers' "Rebar Anchorage and Joint Guidelines [2007 Edition]" as【Class SA】 【Features】 ○ Sizes D13 to D51, Steel grades SD295 to SD490 ○ Only requires tightening with a torque wrench, no grout material needed ○ Easy installation enables a reduction in construction time ○ Compact design with good fit ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste produced as no grout material is used 〇 No ultrasonic inspection required For more details, please contact us or download the catalog.

  • others
  • grout

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical rebar joint [EG cast-in joint (nutless type)]

Mechanical rebar joint [EG cast-in joint (nutless type)]

Easy installation allows for reduced construction time! A mechanical rebar joint born from the trust in friction welding.

The "EG Joint" is a mechanical rebar joint created from the reliability of the deformed bars produced by Godo Steel and friction welding. It allows for easy construction and reduces construction time. 〇 Obtained A-class evaluation according to the performance evaluation standards for rebar joints (Ministry of Construction Notification No. 31) (Japan Architectural Center Evaluation Number: BCJ-RC0538-01) 〇 Confirmed SA-class performance for joint components in the "Guidelines for Rebar Anchorage and Joints [2007 Edition]" by the Japan Society of Civil Engineers 【Features】 ○ Simple installation by just tightening with a torque wrench ○ No grout material required ○ Reduces construction time and labor without the need for special technical skills ○ Compact and well-fitting ○ High structural reliability as all stress transfer occurs through steel 〇 No waste industrial materials generated since no grout material is used * Godo Steel Co., Ltd. and Asahi Kogyo Co., Ltd. established a joint sales company, "Kanto Daybar Steel," in 2019. * For more details, please contact us or download the catalog.

  • grout
  • Concrete Machinery
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical Rebar Coupler 【EG Joint (Standard Type)】

Mechanical Rebar Coupler 【EG Joint (Standard Type)】

No grout material needed for easy installation! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Standard Type)】 is a mechanical rebar joint that connects screws joined by friction welding at the ends of rebar using a coupler, and tightens a lock nut with a torque wrench for easy installation. Because it is groutless, construction can proceed regardless of weather conditions, leading to shortened construction periods and no generation of industrial waste. 〇 Obtained the performance evaluation standard for rebar joints【Class A】 in the 2007 edition of the Technical Standards Commentary on the Structural Aspects of Buildings ((Foundation) Japan Building Center Evaluation Number: BCJ Evaluation-RC 0001-04) 〇 Confirmed the joint performance of the Civil Engineering Society's "Rebar Anchorage and Joint Guidelines [2007 Edition]" as【Class SA】 【Features】 ○ Sizes D13 to D51, Steel Grades SD295 to SD490 ○ No grout material required, just tighten with a torque wrench ○ Not affected by weather during construction ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning conductor for RC structures 〇 No industrial waste generated as no grout is used ○ Parts are shipped already attached to the rebar, eliminating material management hassle ※ Can also be used as a construction joint.

  • Steel bar construction
  • Reinforced concrete construction
  • Steel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical rebar joint 【EG joint (butt joint type)】

Mechanical rebar joint 【EG joint (butt joint type)】

Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Splice Type)】 is a mechanical rebar joint that connects rebar ends joined by friction welding with screws, using a coupler and tightened with a lock nut. It does not require special skills, allowing for a reduction in construction time. Since it is groutless, temperature management is unnecessary, and there is no industrial waste produced. 〇 Obtained the performance evaluation standard for rebar joints【Grade A】 in the 2007 edition of the Structural Technical Standards for Buildings (Evaluation Number by the Japan Architectural Center: BCJ Evaluation-RC 0001-04) 〇 Confirmed the performance of the joint alone as【Grade SA】 in the "Guidelines for Rebar Anchorage and Joints [2007 Edition]" by the Japan Society of Civil Engineers *For more details, please contact us. 【Features】 ○ Sizes D13 to D51, Steel Grades SD295 to SD490 ○ No grout material needed; just tighten with a torque wrench ○ Easy construction enables a reduction in construction time ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste produced as no grout material is used 〇 No ultrasonic inspection required For more information, please contact us or download the catalog.

  • others
  • grout

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Reinforced concrete joints

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.